SAFETY MonITORING RELAY. 2NC OUTPUTS.
IDEM’s SCR-2 is an all purpose safety monitoring relay that ensures the quick and safe deactivation of the moving parts of a machine in case of danger.
Applications include single and dual channel emergency stop circuits or dual channel safety guard monitoring using Tongue Switches or Non Contact Switches.
The internal logic system closes the relay safety outputs when the start button is pressed.
If the control lines are opened by operation of a safety switch or E-stop button then the safety output contacts are opened and safely switch off the supply to the machine. It is ensured that a single fault does not lead to the loss of the safety function and that cyclic monitoring means that any fault is detected no later than the next start up.
Featuring:
Two Force Guided Safety Output Contacts.
Standards: EN60204-1, EN954-1, ISO13849-1, EN62061.
Stop Category 0.
Up to Category 4 to EN954-1.
Up to PLe to ISO13849-1.
SILCL3 EN62061.
Single or Dual Channel input with LED indication of input status.
Redundancy and cycle monitoring.
Feedback loop for monitoring contacts or expansion modules.
Short circuit and earth fault monitoring.
22mm Din Rail Mounting.
sc2:安全监控继电器
安全监测继电器。
2数控输出。
IDEM的scl -2是一种万能安全监控继电器，确保在危险情况下快速和安全地关闭机器的移动部件。
应用包括使用舌形开关或非接触开关的单通道和双通道紧急停止电路或双通道安全保护监控。
当启动按钮被按下时，内部逻辑系统关闭继电器安全输出。
如果控制线路通过安全开关或E-stop按钮操作断开，则安全输出触点断开，安全切断给机器的电源。
确保单个故障不会导致安全功能的丢失，循环监控是指在下次启动之前检测到任何故障。
特色:
两个力引导安全输出触点。
标准:EN60204-1、EN954-1、ISO13849-1、EN62061。
停止类别0。
4级至EN954-1。
可达PLe至ISO13849-1。
SILCL3 EN62061。
单路或双路输入，LED显示输入状态。
冗余和循环监控。
反馈回路监测接触或扩展模块。
短路和接地故障监测。
22mm Din Rail安装。
如有相关IDEM、STI、ASO等品牌产品需求麻烦您拨打以下电话,我们工程师会帮您选型提供参考意见
我公司主要从各类工业安全产品，希望对贵司的安全有所帮助
帮助企业购买到适用产品，是会博一直的追求的！
ASO安全触边全系列销售
IDEM安全产品全系列销售
